KD Factory Co., Ltd

If you have ever used a Tech 2 on a Vauxhall, I'm sure you were amazed at the sheer number of items you can test and talk to!!

OP-COM( VAUX-COM) can give you virtually this level of coverage at a fraction of the price. Almost all current models are included and almost all systems on those models can be diagnosed

The OP-COM(VAUX-COM) PC / Laptop based diagnostic tool for OPEL car

• Works with almost all current Vauxhall models made from 1997 to 2008
• Covers engine, airbag, ABS, alarm, instruments and many more
• Reads fault codes from all modules and displays full English text for them
• Clears fault codes from all modules
• Shows live sensor data as seen by the cars ECU
• Allows you to operate relays, solenoids and actuators
• Program new keys and remote fobs (pin required)

The tool comes complete with intelligent hardware interface and software on CD-Rom.

THIS VERSION ALSO COVERS SAAB 9-5 AND 9-3 CAN

FIRMWARE 1.18 AND SOFT 080114

This interface lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.

Supported Control Units:

• Engine
• Automatic Transmission
• ABS
• Airbag
• Engine Cooling module
• Instrument Cluster
• Electronic Climate Control
• Body Control Unit
• Many others..........

Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

Fault codes will be shown with all available information:

You can print out, save, or copy the fault codes to any other application:

From the fault codes window, you can go directly to the measuring blocks window.
The program shows you measuring block information on many control module, you can choose anything from the list on your own.
The program is capable of showing 8 measuring block parameter simultaneously.

The sample rate is depends mostly on the communication protocol.
For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication

Newer Multec, or Bosch units are faster (using KWP-2000),

Vehicles that use the newest CAN based control units are very fast!

With OP-COM, you can learn keys to immobiliser
remote keys to the central door locking or alarm.
 
You can also reset and program the following immobiliser related items: ECM, BCM, IPC,

You will need the vehicle security code
which can be found on the CAR-PASS.
 
You can also reset and program the Service interval reminder on
Astra-G, Zafira, Corsa-C, Meriva, Tigra-B and more.

You get a feedback on the state of the activated output.
(This will helps you to find the failed components more easily).

You can code SAB6, and SAB8 airbags with the software.

The diagnostic inteface is USB port based
There will be NO COMPATIBILITY ISSUES, with serial to USB converters.

The speed of the communication over the USB-BUS
is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps.

Package Contains:

1.OP COM Interface
2.USB Cable
3.Software and Drivers CD